Thanks for that. Not too technically minded I'm afraid, but did diagnostics bit by holding the OK button on the steering wheel down - after a 20 min drive (mixed, half at 50-70mph), the gauge dropped back to about 65, whilst the diagnostic temperature seemed stuck at 56 (I took 3 readings). Gauge sweep test ok.
Entire dashboard won’t turn on. I was working on my Ford Mondeo 2007 Mk4 station wagon auto, I had the positive terminal unplugged with the keys sitting on the off position in the ignition “0” (which means the key wasn’t turned in any way so the car wasn’t getting any power from what I can tell) I was doing a dry clean and was Ford Mondeo Mk4 instrument cluster forscan Mileage correction. This instrument cluster in this car had a major fault.Therefore required a replacement. ..
(96-00)2.5 V6 Ghia - Instrument Lights not working - lyndy : Wow thanks to the above I have sorted the same problem on my R reg Ford Mondeo, the hardest part was getting the dash section off, a quich spray with WD40 and I am a very happy lady. A garage quoted me ÂŁ85.
Full Beams Not Working. My car is fitted with nee naws due to my occupation so I know that the bulbs on the full beam are working thanks to the headlight flasher, that continues to work, which provides it's own 12v supply and uses the existing ground wire that's already in place. Disconnecting the headlight flasher makes no difference so I know
The Zetec (with out the Converse+) has a standard light on the dash. Usually blinks on and goes off immediately, but has been staying on for much longer due to the arctic conditions ! I'd say the other morning maybe as much as five seconds, but the car hadn't moved the previous day and it has been freezing through the day and overnight between
Hi. i have a ford focus 2012 with voice control system. yesterday the voice control boton stop working and the bluetooth does not work also. when i pr I have ford figo titanium with bt audio device. i have connected my samsung galaxy y pro duos phone to this device but my phone book and call log is n
The clamps are now tight, and all the dash lights come on, headlights, indicators work, radio works, clocks work, but the starter doesn't engage. There is no clicking of any kind from the starter, not even a single click. Its as if the starter isn't there! And I can't see how a loose battery clamp would affect the starter motor once re
2. responses. Radio - 100% Mute and loss of steering wheel control. I have just bought a 2010 2.0 tDCi Mondeo and in two weeks have had instantces of the radio not delivering sound. Firstly, I thought that it was mute button. The radio then started to operate normal 2010 Ford Mondeo ford mondeo 2.0 tdci titanium. Regardless, you could try disconnecting and reconnecting the Convers+ unit. I've heard it tends to be fidgety, every once in a blue moon, something which also has been mentioned elsewhere on this forum. Mondeo Mk4 2008 (BA7) saloon 2.0 TDCi 130 PS (well, 152 PS with the Bluefin installed) Zetec Auto (TF-80/81SC) Speedo cluster type 1, firmware BLaAjt4.
